Modern Trends in Materials Processing
portes grátis
Modern Trends in Materials Processing
Bratan, Sergey; Roshchupkin, Stanislav
Trans Tech Publications Ltd
03/2022
1184
Mole
Inglês
9783035716917
15 a 20 dias
2250
Descrição não disponível.
Preface
Chapter 1: Materials Processing Technologies
Maximum Operability of Replaceable Hard Alloy Plates during Steel Turning EI867-VD
A Note on the Change in the Surface Quality Characteristics during Flat Grinding of Titanium Intermetallic with Shape Memory Effect
Dispersion of Flatness of the Machined Surface and Optimization of Cutting Conditions when Performing a Real Experiment of Face Milling of High-Hardness Steel
Modeling of Molten Metal Flows in a Continuous-Casting Machine Mold at Free Rotation of the Floating Closed-Bottom Nozzle
Modeling of Gear-Hone Teeth with Consideration of Elasticity, Correction, and Operational Wear
Engineering Quality Support of the Surface Layer and Operational Properties of Machine Parts during the Process of Electroerosion
The Model of Local Fracture on Brittle Material Surface during Machining
Investigation of the Effect of Pretreatment of the Carbon Fiber Surface on the Continuity of the Sol-Gel Coating
Contact Stresses during Roller Rolling of Heat-Exchange Tubes
Application of Combined Processing Methods for High-Tech Products Manufacturing
Development of Technology for Producing Holes in Parts with Unpredictable Surface Fluctuations
Welding Mode Justification for a T-Joint
Use of Hidden Phase Transfer Heat for Temperature Stabilization in Technological Cutting Systems
Influence of Processing Modes on the Distribution of Wall Thickness during Cell Formation
Researching of the Influence of the Cutting Parameters of Expanded Polystyrene with a Thermal Tool on the Form Errors of the Product
Determination of the Optimal Temperature for Processing Styrofoam with a Thermo-Tool
Study on the Ultrasonic Vibration Impact on the Performance of Taps when Thread Cutting in Workpieces Made of Difficult-to-Machine Materials
Tilt Angle Effect on Friction Stir Welding Conditions
Investigation of Hadfield Steel Machinability in Milling Operations
The Impact of Cutting Modes on the Output Turn-Milling Parameters for High-Speed Steel
Algorithm of Determination of Optimal Conditions for Low-Rigidity Prismatic Workpieces Flat Grinding
Analysis of the Properties of the Fluidized Bed during the Formation of the Abrasive-Polymer Compound for Waterjet Cutting
Improving Productivity of Misaligned Boring of Hydraulic Cylinder Holes with a Rotating Cutter Block Based on Computer Simulation Results
Combined Processing of Flat End Surfaces of Electrical Parts
Efficiency of Application of Epilams when Protecting the Surface of Fast Cutting Tools
Modeling of Technological Processes for the Deposition of Composite Plasma Coatings
Influence of Forging Force on Tensile Strength of the 30KhGSA/40KhMFA Steels Welded Joints Made by Rotary Friction Welding
Effect of Elements of the Cutting Conditions on the Amplitude of Vibration during End Milling
Titanium Drawing
Effect of Hot Machining on the Surface Quality of Cylindrical Parts
Application of Additive Technologies in the Development of Aerodynamic Models for Rocket and Space Technology Products
Additive Technologies in Manufacturing and IT Industry
Analysis of Factors Affecting Operability to Assess Risks and Opportunities in the Operation of Built-Up Cutting Tools
High-Performance Processing of Complex-Shaped Parts Using Combined Methods
Improving the Efficiency of Machine Grinding of Double Curvature Surfaces with a Profiled Flap Wheel
Calculation of the Grinding Performance of Diamond-Bearing Ceramic Tools
The Use of Laser Surface Modification Technologies for Obtaining Parts of Roller-Screw Mechanism
Development and Implementation of the Technology for Obtaining Channels in the Turbopump Units Bodies
The Use of Additive Technologies in the Study of the Process of Cross Wedge Rolling Workpiece for the Stamping of the Crankshaft
Model Selection and Dragging Parameters in Cross-Wedge Rolling
Research of the Influence of Cutting Conditions on the Temperature Field during Turning
Improving the Corrosion Resistance of Polished Stainless Steel Parts by Introducing the Energy of the Ultrasonic Field into the Forming Zone
Application of Software Tools for Simulation of Hot Isostatic Pressing
The Method of Calculating the Optimal Shape of the Electrode-Tool for Electrochemical Treatment of Gas Turbine Engine Blades
Quantitative Evaluation of the Effectiveness of Laser Surface Modification Technologies
Research the Impulse Stamping Technology of High-Strength Hard-to-Form Alloys
Cold Rolling Electrostimulation of Hard-Deform Alloys
Technological Characteristics of Production of Implants from Titanium and Alloys Based on it
Ultrasonic Surface Machining of Aluminium Alloy Parts
Numerical Simulation of Shrinkage Porosity during Casting Process
Numerical Simulation of Welding Distortion in Laser Metal Deposition Additive Manufacturing Process
Influence of High-Speed ECAP on the Structure and Properties of Copper and Copper Alloy of Cu-Cr System
Manufacture of Molding Tooling Based on TEIS-53 Heat-Resistant Resin
Simulation of a Diamond Grain Interaction with Ceramics Using the Smoothed Particle Galerkin Method
Implementation of a Fatigue Fracture Approach to Grinding Wheel Wear Using Numerical Simulation
Creation of Grooving and Parting Tools with Cooling Channels Manufactured Using Additive Technologies
Additive Technology for Forming Channels with Galvanic-Mechanical Coatings
Research on the Mandrel Wear of a Screw Rolling Piercing Mill by the Finite Element Method
Influence of Friction Stir Welding Modes of Copper and Aluminum Alloys
Influence of the Duration of Current Pulses on the Roughness in the Combined Processing of Corrosion Steel 12H18N10T
Simulation of Rolling and Analysis of Structure and Properties of F420W Cold-Resistant Steel for Manufacture of Wind Turbine Towers
Hybrid Optimization for Machinability Enhancement during Green Machining of Stainless Steel
Developing Spiral-Conical Gears for Microsystems by Wire-Assisted Electrical Discharge Machining
Some Aspects of the Experimental Method for Determining Residual Stresses in the Circular Grooves of Body Parts
Influence of Preheating and Postweld Heat Treatment on the Structure and Strength of the Wire Frame Welded Joint Made of Spring Steel C62D
Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites
The Effect of Hydrogen on the Crack Resistance in the Laser Treatment Area of Structural Steels Used for the Manufacture of Sealed Capsules during Hot Isostatic Pressing
Technology of Obtaining and Mechanical Processing of Resistant Powder Coatings of Ni-Mo-Al System
Modernization of Electrode Composite Material Based on Copper Powder for Electrical Discharge Machining of High-Strength Alloys
Development of Thermoplastic Composite Tube from HDPE/Barley Straw Fibers Using Extrusion Method
Sequential Treatment of Steel Surfaces by Nitriding and Ultrasonic Hardening
Quality Control of Gas-Thermal Coatings of Variable Composition
Constructional Features and Energetic Parameters Influence on Structure Formation and Sealed Welded Joints Properties in the Production of Capsules for Hot Isostatic Pressing
Modification of the Surface of Structural Materials by Concentrated Energy Flows in Order to Improve their Performance Properties
The Peculiar Properties of Economically Effective Technology of Forming of the Ceramic Coating Based on Aluminum Oxide
Intensification of Restoration of Hydraulic Equipment Components by Iron Plating in the Flow of Electrolyte
Mathematical Modeling of Anodic Oxidation and Cathodic Reduction of Metals Prone to Passivation, Taking into Account the Peculiarities of Heat and Mass Transfer in the IEG under Pulsed Modes
Friction-Electric Modification of the Surfaces of Machine Parts with Tungsten Carbides
Weldability Window for High-Velocity Impact Welding of Al and Ti Plates Obtained by Numerical Simulation
Study of the Effect of Copper (II), Zinc and Iron (II) Sulphates on the Froth Flotation of Sphalerite by Sulfhydryl Collectors
Chapter 2: Materials Science
On the "Super" Storage of Hydrogen in Activated Graphite Nanofibers
Investigation of the Effect of Vibration on the Bearing Capacity of Composite Materials
Computational and Experimental Evaluation of the Tensile Strength of a Reinforced Polymer Coating with a Substrate
Microstructure and Properties of 20Cr23Ni18 (AISI 304L) Thin Steel Tapes Obtained by Melt Spinning
Tribological Behavior of Titanium Alloys during Friction against Ceramics
Regularities of Mass Transfer in the Finishing Layer on the Basis of a Heat-Insulating Dry Construction Mixture in the Process of Moistening
Quality Assurance for the Appearance of Paint Coatings
Increased Material Durability with a Discrete Oxide Layer
Mathematical Modeling of Optimization Process for Shell Mold Material Physical Properties and Structure
Polylactide Fiber Materials and their Application in Agriculture
Influence of Biodegradable Component Nature on Biodegradation of Composites Based on Polyethylene
Methods of Titanium Carbide-Based Coatings Laser Synthesis
Method of Diamond-Like Coatings Obtaining
Formation of High-Entropy Multilayer Compositions with a Hierarchical Structure
Corrosion Processes of Steel Reinforcement in Concrete Structures Based on Secondary Resources of Metallurgical Production
Stages and Irregularities of Plastic Strain in Austenitic Stainless Steel within a Temperature Range of 143 < t < 420 k
A Study of the Effect of Impact Speed on the Dynamics of Mechanical Interactions of Bodies
Changes in Mechanical Characteristics of HPC Samples Modified with WC and WO3 Nanopowder Agglomerates
Research of the Possibility of Using Glass and Sodium Hydroxide for Synthesis of Aluminum Silicate Propants Based on Drill Sludges
Changes in Wettability and Corrosion Properties of Coatings Obtained on MA8 Magnesium Alloy after Accelerated Climatic Tests
Determination of Optimal Parameters for Silicon Dioxide Production
Influence of Tungsten Nanopowders on the Kinetics of Cement Stone Strength Gain
Composite Nanomaterials for Implementation of Promising Memristive Structures
Monitoring of Properties Subjected to Innovative Technological Treatments of Subsurface Layers of Materials by AMD-Methods
Preparation of Carbidostals
Thermodynamic Analysis of the Nickel-Chromium-Titanium-Nitrogen System
Optimization of Dispersion-Strengthened Material Based on Copper Powder for Valve Guides of Internal Combustion Engines
Modeling the Temperature Dependences of the Dielectric Constant of PCM under Conditions of Intense Heating
Testing of PTFE-Based Antifouling Coatings in Fresh Water
Microstructure and Phase Composition of the Cr-Mn-Fe-Co-Ni High-Entropy Alloy Obtained by Wire-Arc Additive Manufacturing
Influence of the Titanium Nitride Deposition Duration during Vacuum Ion-Plasma Treatment on the Resistance of Coatings in a Hydrogen Atmosphere
Effect of a Sintering Additive's Concentration Forming a Solid Solution with Aluminum Spinel, on Phase Formation
Effect of Pb Small Additives on the Phase Composition and Microstructure Pd-Based Membrane Alloys
Stages of Cavitation Erosion Development on Steel Surfaces
Computational and Experimental Methods of Strength Analysis of Polyurethane Diaphragms Operating under Cyclic Loadings
Influence of Surface Tension of the Intrapore Liquid on Structural-Surface Properties of Hydrated Aluminum Oxide Obtained by Interaction of Aluminum Salts with Ammonia Gas
Effect of Atmospheric Pressure Plasma in Inert Gases on Orthopedic Ultra-High Molecular Weight Polyethylene
Influence of Severe Plastic Deformations on Martensitic Transformation in Alloys of Fe-Cr-Ni System
Isothermal Transformation Diagrams of Austenite in Maraging Steel 08H15N5D2T at Overcooling
Influence of Curved Fibers on the Mechanical Behavior of Variable Stiffness Composites
Deformation Cycle Resistance of Titanium Nickelide - Polymer Composite Material
Determination of Rational Structural Parameters for Sandwich Panels with a Cone-Shaped Filler's Cells
Carbon Nanomaterials in Electrochemical Coatings of Machinery Products
The Structure and Magnetic Properties of (Sm,Er)-Fe-N Powders Prepared by Ball Milling
Plastic Strain Localization in Steel Composites Produced via Additive Manufacturing
Study of Ageing Processes of a Nickel Superalloy under Conditions of High-Temperature Loadings
The Structure and Properties of Hardening Coatings of Low-Chromium Hard Alloys for Agricultural Machine Parts
Superminiature Eddy Current Probe for Measuring the Electrical Conductivity of Copper Thin Films
Gypsum Composite Reinforced with Polymer Fibers
Experimental Study of Material Structure in the Processing of Ball Pins
Thin Ni/Al Metal Films Characterization Using a High-Frequency Electromagnetic Field
Nonlocality of Dynamic Characteristics for Edge Dislocation Segment, Elastic Interaction of Dislocation with Pinning Points, and their Effect on Dislocation AIIF
Dispersion of the Steel Structure and its Effect on Magnetic and Mechanical Properties of Steel
Increasing the Fire Resistance of Reinforced Concrete Structures
Justification of the Titanium-Based Alloy Chemical Composition to Provide High Hardness
Numerical Simulation of the Stress-Strain State of a Hybrid Titanium-Polymer Composite Material for Optimizing the Design of Aircraft Structures
Research of Wear Resistance of Medical Materials during Friction with High-Molecular Polyethylene
In Situ Phase Transformations in CrN/Cr-?oated E110 Alloy under High Temperature
Influence of Various Production and Processing Methods on the Structure and Properties of Porous Titanium Coatings
Investigation of Factors Affecting Adhesion Strength of Adhesive Layer to Substrate Surface
Amorphous-Crystalline Composite Microstructure Formation in Zr46Cu46Al8 Alloy at the Conditions of Selective Laser Melting
Reference Data and Multi-Factorial Methods for Development of Modern Materials
Non-Sinusoidal Waves in a Metamaterial, Specified as a Nonlinear Elastic Lattice with a Center of Symmetry
Wood-Cement Composite and its Reinforcement with Wooden Bars
Evaluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations
Features of the Microstructural Composition of Low-Alloyed Aluminum Alloys of the 6XXX Series with Small Additions of Zr and Sc
Prospects for the Synthesis of Silicate Geopolymer Materials Based on Ash and Slag Waste from Thermal Power Plants in the Russian Arctic Zone
Prospects for Improving Physical and Mechanical Properties of Corundum Ceramics
Physical Modification of Products Made of Soft Magnetic Materials under Texturing Effects
Investigation of the Parameters of the Surface Layer of Steel 12X18H10T after Plastic Deformation
Large-Scale Synthesis of Molybdenum Carbide Based Catalyst by Vacuum-Free D? Arc Plasma Method
Application of the Method for Optical Measuring the Neck Profile to Determine the Hardening Curve of Aluminum from the Results of the Tensile Test
Relation of the Mayer Index to the Characteristics of the Power Law of Metal Hardening
Determination of the Tensile Strain by Indenting the Sphere
Structural Transformations at the Interface of Explosively Welded Al and Ti: Experimental Research and Numerical Simulation
Influence of Composition and Structure on Wear Resistance of Deposited Metal
Influence of Titanium and Nitrogen on Phase Composition and Properties of Coatings Obtained by Surfacing with Cast Rods of PNL-04Kh27N7M3D2T Type
Production of Nanostructured Boron Carbide Ceramics for Industrial Applications
Application of Nano-Chromium Oxide for Production of Boron Carbide Ceramics
The Structure and Characteristics of Wear-Resistant Coatings, Obtained by Supersonic Plasma Spraying
Identification of Elastic Characteristics of Unidirectional CFRP under Off-Axis Tension Taking into Account the Rates of Loading
Stability of a Rectangular Shape Memory Alloy Plate during the Forward Phase Transition for Thermomechanically Coupled Statement
Testing of Magnetoactive Elastomeric Composite Materials
Mechanical Properties of Co-Al-Mo-Nb Intermetallic Alloys
Effect of Heat Treatment on Structure of Austenitic Steels Fabricated by Laser Synthesis
Development and Research of Composite Coatings of Ti-B System, Sprayed by Microplasma Method
Change in the Fine Structure of the Additive Al-Mg Alloy after Electron-Beam Processing
Chapter 1: Materials Processing Technologies
Maximum Operability of Replaceable Hard Alloy Plates during Steel Turning EI867-VD
A Note on the Change in the Surface Quality Characteristics during Flat Grinding of Titanium Intermetallic with Shape Memory Effect
Dispersion of Flatness of the Machined Surface and Optimization of Cutting Conditions when Performing a Real Experiment of Face Milling of High-Hardness Steel
Modeling of Molten Metal Flows in a Continuous-Casting Machine Mold at Free Rotation of the Floating Closed-Bottom Nozzle
Modeling of Gear-Hone Teeth with Consideration of Elasticity, Correction, and Operational Wear
Engineering Quality Support of the Surface Layer and Operational Properties of Machine Parts during the Process of Electroerosion
The Model of Local Fracture on Brittle Material Surface during Machining
Investigation of the Effect of Pretreatment of the Carbon Fiber Surface on the Continuity of the Sol-Gel Coating
Contact Stresses during Roller Rolling of Heat-Exchange Tubes
Application of Combined Processing Methods for High-Tech Products Manufacturing
Development of Technology for Producing Holes in Parts with Unpredictable Surface Fluctuations
Welding Mode Justification for a T-Joint
Use of Hidden Phase Transfer Heat for Temperature Stabilization in Technological Cutting Systems
Influence of Processing Modes on the Distribution of Wall Thickness during Cell Formation
Researching of the Influence of the Cutting Parameters of Expanded Polystyrene with a Thermal Tool on the Form Errors of the Product
Determination of the Optimal Temperature for Processing Styrofoam with a Thermo-Tool
Study on the Ultrasonic Vibration Impact on the Performance of Taps when Thread Cutting in Workpieces Made of Difficult-to-Machine Materials
Tilt Angle Effect on Friction Stir Welding Conditions
Investigation of Hadfield Steel Machinability in Milling Operations
The Impact of Cutting Modes on the Output Turn-Milling Parameters for High-Speed Steel
Algorithm of Determination of Optimal Conditions for Low-Rigidity Prismatic Workpieces Flat Grinding
Analysis of the Properties of the Fluidized Bed during the Formation of the Abrasive-Polymer Compound for Waterjet Cutting
Improving Productivity of Misaligned Boring of Hydraulic Cylinder Holes with a Rotating Cutter Block Based on Computer Simulation Results
Combined Processing of Flat End Surfaces of Electrical Parts
Efficiency of Application of Epilams when Protecting the Surface of Fast Cutting Tools
Modeling of Technological Processes for the Deposition of Composite Plasma Coatings
Influence of Forging Force on Tensile Strength of the 30KhGSA/40KhMFA Steels Welded Joints Made by Rotary Friction Welding
Effect of Elements of the Cutting Conditions on the Amplitude of Vibration during End Milling
Titanium Drawing
Effect of Hot Machining on the Surface Quality of Cylindrical Parts
Application of Additive Technologies in the Development of Aerodynamic Models for Rocket and Space Technology Products
Additive Technologies in Manufacturing and IT Industry
Analysis of Factors Affecting Operability to Assess Risks and Opportunities in the Operation of Built-Up Cutting Tools
High-Performance Processing of Complex-Shaped Parts Using Combined Methods
Improving the Efficiency of Machine Grinding of Double Curvature Surfaces with a Profiled Flap Wheel
Calculation of the Grinding Performance of Diamond-Bearing Ceramic Tools
The Use of Laser Surface Modification Technologies for Obtaining Parts of Roller-Screw Mechanism
Development and Implementation of the Technology for Obtaining Channels in the Turbopump Units Bodies
The Use of Additive Technologies in the Study of the Process of Cross Wedge Rolling Workpiece for the Stamping of the Crankshaft
Model Selection and Dragging Parameters in Cross-Wedge Rolling
Research of the Influence of Cutting Conditions on the Temperature Field during Turning
Improving the Corrosion Resistance of Polished Stainless Steel Parts by Introducing the Energy of the Ultrasonic Field into the Forming Zone
Application of Software Tools for Simulation of Hot Isostatic Pressing
The Method of Calculating the Optimal Shape of the Electrode-Tool for Electrochemical Treatment of Gas Turbine Engine Blades
Quantitative Evaluation of the Effectiveness of Laser Surface Modification Technologies
Research the Impulse Stamping Technology of High-Strength Hard-to-Form Alloys
Cold Rolling Electrostimulation of Hard-Deform Alloys
Technological Characteristics of Production of Implants from Titanium and Alloys Based on it
Ultrasonic Surface Machining of Aluminium Alloy Parts
Numerical Simulation of Shrinkage Porosity during Casting Process
Numerical Simulation of Welding Distortion in Laser Metal Deposition Additive Manufacturing Process
Influence of High-Speed ECAP on the Structure and Properties of Copper and Copper Alloy of Cu-Cr System
Manufacture of Molding Tooling Based on TEIS-53 Heat-Resistant Resin
Simulation of a Diamond Grain Interaction with Ceramics Using the Smoothed Particle Galerkin Method
Implementation of a Fatigue Fracture Approach to Grinding Wheel Wear Using Numerical Simulation
Creation of Grooving and Parting Tools with Cooling Channels Manufactured Using Additive Technologies
Additive Technology for Forming Channels with Galvanic-Mechanical Coatings
Research on the Mandrel Wear of a Screw Rolling Piercing Mill by the Finite Element Method
Influence of Friction Stir Welding Modes of Copper and Aluminum Alloys
Influence of the Duration of Current Pulses on the Roughness in the Combined Processing of Corrosion Steel 12H18N10T
Simulation of Rolling and Analysis of Structure and Properties of F420W Cold-Resistant Steel for Manufacture of Wind Turbine Towers
Hybrid Optimization for Machinability Enhancement during Green Machining of Stainless Steel
Developing Spiral-Conical Gears for Microsystems by Wire-Assisted Electrical Discharge Machining
Some Aspects of the Experimental Method for Determining Residual Stresses in the Circular Grooves of Body Parts
Influence of Preheating and Postweld Heat Treatment on the Structure and Strength of the Wire Frame Welded Joint Made of Spring Steel C62D
Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites
The Effect of Hydrogen on the Crack Resistance in the Laser Treatment Area of Structural Steels Used for the Manufacture of Sealed Capsules during Hot Isostatic Pressing
Technology of Obtaining and Mechanical Processing of Resistant Powder Coatings of Ni-Mo-Al System
Modernization of Electrode Composite Material Based on Copper Powder for Electrical Discharge Machining of High-Strength Alloys
Development of Thermoplastic Composite Tube from HDPE/Barley Straw Fibers Using Extrusion Method
Sequential Treatment of Steel Surfaces by Nitriding and Ultrasonic Hardening
Quality Control of Gas-Thermal Coatings of Variable Composition
Constructional Features and Energetic Parameters Influence on Structure Formation and Sealed Welded Joints Properties in the Production of Capsules for Hot Isostatic Pressing
Modification of the Surface of Structural Materials by Concentrated Energy Flows in Order to Improve their Performance Properties
The Peculiar Properties of Economically Effective Technology of Forming of the Ceramic Coating Based on Aluminum Oxide
Intensification of Restoration of Hydraulic Equipment Components by Iron Plating in the Flow of Electrolyte
Mathematical Modeling of Anodic Oxidation and Cathodic Reduction of Metals Prone to Passivation, Taking into Account the Peculiarities of Heat and Mass Transfer in the IEG under Pulsed Modes
Friction-Electric Modification of the Surfaces of Machine Parts with Tungsten Carbides
Weldability Window for High-Velocity Impact Welding of Al and Ti Plates Obtained by Numerical Simulation
Study of the Effect of Copper (II), Zinc and Iron (II) Sulphates on the Froth Flotation of Sphalerite by Sulfhydryl Collectors
Chapter 2: Materials Science
On the "Super" Storage of Hydrogen in Activated Graphite Nanofibers
Investigation of the Effect of Vibration on the Bearing Capacity of Composite Materials
Computational and Experimental Evaluation of the Tensile Strength of a Reinforced Polymer Coating with a Substrate
Microstructure and Properties of 20Cr23Ni18 (AISI 304L) Thin Steel Tapes Obtained by Melt Spinning
Tribological Behavior of Titanium Alloys during Friction against Ceramics
Regularities of Mass Transfer in the Finishing Layer on the Basis of a Heat-Insulating Dry Construction Mixture in the Process of Moistening
Quality Assurance for the Appearance of Paint Coatings
Increased Material Durability with a Discrete Oxide Layer
Mathematical Modeling of Optimization Process for Shell Mold Material Physical Properties and Structure
Polylactide Fiber Materials and their Application in Agriculture
Influence of Biodegradable Component Nature on Biodegradation of Composites Based on Polyethylene
Methods of Titanium Carbide-Based Coatings Laser Synthesis
Method of Diamond-Like Coatings Obtaining
Formation of High-Entropy Multilayer Compositions with a Hierarchical Structure
Corrosion Processes of Steel Reinforcement in Concrete Structures Based on Secondary Resources of Metallurgical Production
Stages and Irregularities of Plastic Strain in Austenitic Stainless Steel within a Temperature Range of 143 < t < 420 k
A Study of the Effect of Impact Speed on the Dynamics of Mechanical Interactions of Bodies
Changes in Mechanical Characteristics of HPC Samples Modified with WC and WO3 Nanopowder Agglomerates
Research of the Possibility of Using Glass and Sodium Hydroxide for Synthesis of Aluminum Silicate Propants Based on Drill Sludges
Changes in Wettability and Corrosion Properties of Coatings Obtained on MA8 Magnesium Alloy after Accelerated Climatic Tests
Determination of Optimal Parameters for Silicon Dioxide Production
Influence of Tungsten Nanopowders on the Kinetics of Cement Stone Strength Gain
Composite Nanomaterials for Implementation of Promising Memristive Structures
Monitoring of Properties Subjected to Innovative Technological Treatments of Subsurface Layers of Materials by AMD-Methods
Preparation of Carbidostals
Thermodynamic Analysis of the Nickel-Chromium-Titanium-Nitrogen System
Optimization of Dispersion-Strengthened Material Based on Copper Powder for Valve Guides of Internal Combustion Engines
Modeling the Temperature Dependences of the Dielectric Constant of PCM under Conditions of Intense Heating
Testing of PTFE-Based Antifouling Coatings in Fresh Water
Microstructure and Phase Composition of the Cr-Mn-Fe-Co-Ni High-Entropy Alloy Obtained by Wire-Arc Additive Manufacturing
Influence of the Titanium Nitride Deposition Duration during Vacuum Ion-Plasma Treatment on the Resistance of Coatings in a Hydrogen Atmosphere
Effect of a Sintering Additive's Concentration Forming a Solid Solution with Aluminum Spinel, on Phase Formation
Effect of Pb Small Additives on the Phase Composition and Microstructure Pd-Based Membrane Alloys
Stages of Cavitation Erosion Development on Steel Surfaces
Computational and Experimental Methods of Strength Analysis of Polyurethane Diaphragms Operating under Cyclic Loadings
Influence of Surface Tension of the Intrapore Liquid on Structural-Surface Properties of Hydrated Aluminum Oxide Obtained by Interaction of Aluminum Salts with Ammonia Gas
Effect of Atmospheric Pressure Plasma in Inert Gases on Orthopedic Ultra-High Molecular Weight Polyethylene
Influence of Severe Plastic Deformations on Martensitic Transformation in Alloys of Fe-Cr-Ni System
Isothermal Transformation Diagrams of Austenite in Maraging Steel 08H15N5D2T at Overcooling
Influence of Curved Fibers on the Mechanical Behavior of Variable Stiffness Composites
Deformation Cycle Resistance of Titanium Nickelide - Polymer Composite Material
Determination of Rational Structural Parameters for Sandwich Panels with a Cone-Shaped Filler's Cells
Carbon Nanomaterials in Electrochemical Coatings of Machinery Products
The Structure and Magnetic Properties of (Sm,Er)-Fe-N Powders Prepared by Ball Milling
Plastic Strain Localization in Steel Composites Produced via Additive Manufacturing
Study of Ageing Processes of a Nickel Superalloy under Conditions of High-Temperature Loadings
The Structure and Properties of Hardening Coatings of Low-Chromium Hard Alloys for Agricultural Machine Parts
Superminiature Eddy Current Probe for Measuring the Electrical Conductivity of Copper Thin Films
Gypsum Composite Reinforced with Polymer Fibers
Experimental Study of Material Structure in the Processing of Ball Pins
Thin Ni/Al Metal Films Characterization Using a High-Frequency Electromagnetic Field
Nonlocality of Dynamic Characteristics for Edge Dislocation Segment, Elastic Interaction of Dislocation with Pinning Points, and their Effect on Dislocation AIIF
Dispersion of the Steel Structure and its Effect on Magnetic and Mechanical Properties of Steel
Increasing the Fire Resistance of Reinforced Concrete Structures
Justification of the Titanium-Based Alloy Chemical Composition to Provide High Hardness
Numerical Simulation of the Stress-Strain State of a Hybrid Titanium-Polymer Composite Material for Optimizing the Design of Aircraft Structures
Research of Wear Resistance of Medical Materials during Friction with High-Molecular Polyethylene
In Situ Phase Transformations in CrN/Cr-?oated E110 Alloy under High Temperature
Influence of Various Production and Processing Methods on the Structure and Properties of Porous Titanium Coatings
Investigation of Factors Affecting Adhesion Strength of Adhesive Layer to Substrate Surface
Amorphous-Crystalline Composite Microstructure Formation in Zr46Cu46Al8 Alloy at the Conditions of Selective Laser Melting
Reference Data and Multi-Factorial Methods for Development of Modern Materials
Non-Sinusoidal Waves in a Metamaterial, Specified as a Nonlinear Elastic Lattice with a Center of Symmetry
Wood-Cement Composite and its Reinforcement with Wooden Bars
Evaluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations
Features of the Microstructural Composition of Low-Alloyed Aluminum Alloys of the 6XXX Series with Small Additions of Zr and Sc
Prospects for the Synthesis of Silicate Geopolymer Materials Based on Ash and Slag Waste from Thermal Power Plants in the Russian Arctic Zone
Prospects for Improving Physical and Mechanical Properties of Corundum Ceramics
Physical Modification of Products Made of Soft Magnetic Materials under Texturing Effects
Investigation of the Parameters of the Surface Layer of Steel 12X18H10T after Plastic Deformation
Large-Scale Synthesis of Molybdenum Carbide Based Catalyst by Vacuum-Free D? Arc Plasma Method
Application of the Method for Optical Measuring the Neck Profile to Determine the Hardening Curve of Aluminum from the Results of the Tensile Test
Relation of the Mayer Index to the Characteristics of the Power Law of Metal Hardening
Determination of the Tensile Strain by Indenting the Sphere
Structural Transformations at the Interface of Explosively Welded Al and Ti: Experimental Research and Numerical Simulation
Influence of Composition and Structure on Wear Resistance of Deposited Metal
Influence of Titanium and Nitrogen on Phase Composition and Properties of Coatings Obtained by Surfacing with Cast Rods of PNL-04Kh27N7M3D2T Type
Production of Nanostructured Boron Carbide Ceramics for Industrial Applications
Application of Nano-Chromium Oxide for Production of Boron Carbide Ceramics
The Structure and Characteristics of Wear-Resistant Coatings, Obtained by Supersonic Plasma Spraying
Identification of Elastic Characteristics of Unidirectional CFRP under Off-Axis Tension Taking into Account the Rates of Loading
Stability of a Rectangular Shape Memory Alloy Plate during the Forward Phase Transition for Thermomechanically Coupled Statement
Testing of Magnetoactive Elastomeric Composite Materials
Mechanical Properties of Co-Al-Mo-Nb Intermetallic Alloys
Effect of Heat Treatment on Structure of Austenitic Steels Fabricated by Laser Synthesis
Development and Research of Composite Coatings of Ti-B System, Sprayed by Microplasma Method
Change in the Fine Structure of the Additive Al-Mg Alloy after Electron-Beam Processing
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Additive Technologies;Alloy;Casting;Cavitation Erosion;Cement;Ceramics;Coating;Combined Processing;Composite;Corrosion;Cyclic Loading;Electrical Discharge Machining;Electrochemical Treatment;Electrodeposition;Electron-Beam Processing;Extrusion
Preface
Chapter 1: Materials Processing Technologies
Maximum Operability of Replaceable Hard Alloy Plates during Steel Turning EI867-VD
A Note on the Change in the Surface Quality Characteristics during Flat Grinding of Titanium Intermetallic with Shape Memory Effect
Dispersion of Flatness of the Machined Surface and Optimization of Cutting Conditions when Performing a Real Experiment of Face Milling of High-Hardness Steel
Modeling of Molten Metal Flows in a Continuous-Casting Machine Mold at Free Rotation of the Floating Closed-Bottom Nozzle
Modeling of Gear-Hone Teeth with Consideration of Elasticity, Correction, and Operational Wear
Engineering Quality Support of the Surface Layer and Operational Properties of Machine Parts during the Process of Electroerosion
The Model of Local Fracture on Brittle Material Surface during Machining
Investigation of the Effect of Pretreatment of the Carbon Fiber Surface on the Continuity of the Sol-Gel Coating
Contact Stresses during Roller Rolling of Heat-Exchange Tubes
Application of Combined Processing Methods for High-Tech Products Manufacturing
Development of Technology for Producing Holes in Parts with Unpredictable Surface Fluctuations
Welding Mode Justification for a T-Joint
Use of Hidden Phase Transfer Heat for Temperature Stabilization in Technological Cutting Systems
Influence of Processing Modes on the Distribution of Wall Thickness during Cell Formation
Researching of the Influence of the Cutting Parameters of Expanded Polystyrene with a Thermal Tool on the Form Errors of the Product
Determination of the Optimal Temperature for Processing Styrofoam with a Thermo-Tool
Study on the Ultrasonic Vibration Impact on the Performance of Taps when Thread Cutting in Workpieces Made of Difficult-to-Machine Materials
Tilt Angle Effect on Friction Stir Welding Conditions
Investigation of Hadfield Steel Machinability in Milling Operations
The Impact of Cutting Modes on the Output Turn-Milling Parameters for High-Speed Steel
Algorithm of Determination of Optimal Conditions for Low-Rigidity Prismatic Workpieces Flat Grinding
Analysis of the Properties of the Fluidized Bed during the Formation of the Abrasive-Polymer Compound for Waterjet Cutting
Improving Productivity of Misaligned Boring of Hydraulic Cylinder Holes with a Rotating Cutter Block Based on Computer Simulation Results
Combined Processing of Flat End Surfaces of Electrical Parts
Efficiency of Application of Epilams when Protecting the Surface of Fast Cutting Tools
Modeling of Technological Processes for the Deposition of Composite Plasma Coatings
Influence of Forging Force on Tensile Strength of the 30KhGSA/40KhMFA Steels Welded Joints Made by Rotary Friction Welding
Effect of Elements of the Cutting Conditions on the Amplitude of Vibration during End Milling
Titanium Drawing
Effect of Hot Machining on the Surface Quality of Cylindrical Parts
Application of Additive Technologies in the Development of Aerodynamic Models for Rocket and Space Technology Products
Additive Technologies in Manufacturing and IT Industry
Analysis of Factors Affecting Operability to Assess Risks and Opportunities in the Operation of Built-Up Cutting Tools
High-Performance Processing of Complex-Shaped Parts Using Combined Methods
Improving the Efficiency of Machine Grinding of Double Curvature Surfaces with a Profiled Flap Wheel
Calculation of the Grinding Performance of Diamond-Bearing Ceramic Tools
The Use of Laser Surface Modification Technologies for Obtaining Parts of Roller-Screw Mechanism
Development and Implementation of the Technology for Obtaining Channels in the Turbopump Units Bodies
The Use of Additive Technologies in the Study of the Process of Cross Wedge Rolling Workpiece for the Stamping of the Crankshaft
Model Selection and Dragging Parameters in Cross-Wedge Rolling
Research of the Influence of Cutting Conditions on the Temperature Field during Turning
Improving the Corrosion Resistance of Polished Stainless Steel Parts by Introducing the Energy of the Ultrasonic Field into the Forming Zone
Application of Software Tools for Simulation of Hot Isostatic Pressing
The Method of Calculating the Optimal Shape of the Electrode-Tool for Electrochemical Treatment of Gas Turbine Engine Blades
Quantitative Evaluation of the Effectiveness of Laser Surface Modification Technologies
Research the Impulse Stamping Technology of High-Strength Hard-to-Form Alloys
Cold Rolling Electrostimulation of Hard-Deform Alloys
Technological Characteristics of Production of Implants from Titanium and Alloys Based on it
Ultrasonic Surface Machining of Aluminium Alloy Parts
Numerical Simulation of Shrinkage Porosity during Casting Process
Numerical Simulation of Welding Distortion in Laser Metal Deposition Additive Manufacturing Process
Influence of High-Speed ECAP on the Structure and Properties of Copper and Copper Alloy of Cu-Cr System
Manufacture of Molding Tooling Based on TEIS-53 Heat-Resistant Resin
Simulation of a Diamond Grain Interaction with Ceramics Using the Smoothed Particle Galerkin Method
Implementation of a Fatigue Fracture Approach to Grinding Wheel Wear Using Numerical Simulation
Creation of Grooving and Parting Tools with Cooling Channels Manufactured Using Additive Technologies
Additive Technology for Forming Channels with Galvanic-Mechanical Coatings
Research on the Mandrel Wear of a Screw Rolling Piercing Mill by the Finite Element Method
Influence of Friction Stir Welding Modes of Copper and Aluminum Alloys
Influence of the Duration of Current Pulses on the Roughness in the Combined Processing of Corrosion Steel 12H18N10T
Simulation of Rolling and Analysis of Structure and Properties of F420W Cold-Resistant Steel for Manufacture of Wind Turbine Towers
Hybrid Optimization for Machinability Enhancement during Green Machining of Stainless Steel
Developing Spiral-Conical Gears for Microsystems by Wire-Assisted Electrical Discharge Machining
Some Aspects of the Experimental Method for Determining Residual Stresses in the Circular Grooves of Body Parts
Influence of Preheating and Postweld Heat Treatment on the Structure and Strength of the Wire Frame Welded Joint Made of Spring Steel C62D
Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites
The Effect of Hydrogen on the Crack Resistance in the Laser Treatment Area of Structural Steels Used for the Manufacture of Sealed Capsules during Hot Isostatic Pressing
Technology of Obtaining and Mechanical Processing of Resistant Powder Coatings of Ni-Mo-Al System
Modernization of Electrode Composite Material Based on Copper Powder for Electrical Discharge Machining of High-Strength Alloys
Development of Thermoplastic Composite Tube from HDPE/Barley Straw Fibers Using Extrusion Method
Sequential Treatment of Steel Surfaces by Nitriding and Ultrasonic Hardening
Quality Control of Gas-Thermal Coatings of Variable Composition
Constructional Features and Energetic Parameters Influence on Structure Formation and Sealed Welded Joints Properties in the Production of Capsules for Hot Isostatic Pressing
Modification of the Surface of Structural Materials by Concentrated Energy Flows in Order to Improve their Performance Properties
The Peculiar Properties of Economically Effective Technology of Forming of the Ceramic Coating Based on Aluminum Oxide
Intensification of Restoration of Hydraulic Equipment Components by Iron Plating in the Flow of Electrolyte
Mathematical Modeling of Anodic Oxidation and Cathodic Reduction of Metals Prone to Passivation, Taking into Account the Peculiarities of Heat and Mass Transfer in the IEG under Pulsed Modes
Friction-Electric Modification of the Surfaces of Machine Parts with Tungsten Carbides
Weldability Window for High-Velocity Impact Welding of Al and Ti Plates Obtained by Numerical Simulation
Study of the Effect of Copper (II), Zinc and Iron (II) Sulphates on the Froth Flotation of Sphalerite by Sulfhydryl Collectors
Chapter 2: Materials Science
On the "Super" Storage of Hydrogen in Activated Graphite Nanofibers
Investigation of the Effect of Vibration on the Bearing Capacity of Composite Materials
Computational and Experimental Evaluation of the Tensile Strength of a Reinforced Polymer Coating with a Substrate
Microstructure and Properties of 20Cr23Ni18 (AISI 304L) Thin Steel Tapes Obtained by Melt Spinning
Tribological Behavior of Titanium Alloys during Friction against Ceramics
Regularities of Mass Transfer in the Finishing Layer on the Basis of a Heat-Insulating Dry Construction Mixture in the Process of Moistening
Quality Assurance for the Appearance of Paint Coatings
Increased Material Durability with a Discrete Oxide Layer
Mathematical Modeling of Optimization Process for Shell Mold Material Physical Properties and Structure
Polylactide Fiber Materials and their Application in Agriculture
Influence of Biodegradable Component Nature on Biodegradation of Composites Based on Polyethylene
Methods of Titanium Carbide-Based Coatings Laser Synthesis
Method of Diamond-Like Coatings Obtaining
Formation of High-Entropy Multilayer Compositions with a Hierarchical Structure
Corrosion Processes of Steel Reinforcement in Concrete Structures Based on Secondary Resources of Metallurgical Production
Stages and Irregularities of Plastic Strain in Austenitic Stainless Steel within a Temperature Range of 143 < t < 420 k
A Study of the Effect of Impact Speed on the Dynamics of Mechanical Interactions of Bodies
Changes in Mechanical Characteristics of HPC Samples Modified with WC and WO3 Nanopowder Agglomerates
Research of the Possibility of Using Glass and Sodium Hydroxide for Synthesis of Aluminum Silicate Propants Based on Drill Sludges
Changes in Wettability and Corrosion Properties of Coatings Obtained on MA8 Magnesium Alloy after Accelerated Climatic Tests
Determination of Optimal Parameters for Silicon Dioxide Production
Influence of Tungsten Nanopowders on the Kinetics of Cement Stone Strength Gain
Composite Nanomaterials for Implementation of Promising Memristive Structures
Monitoring of Properties Subjected to Innovative Technological Treatments of Subsurface Layers of Materials by AMD-Methods
Preparation of Carbidostals
Thermodynamic Analysis of the Nickel-Chromium-Titanium-Nitrogen System
Optimization of Dispersion-Strengthened Material Based on Copper Powder for Valve Guides of Internal Combustion Engines
Modeling the Temperature Dependences of the Dielectric Constant of PCM under Conditions of Intense Heating
Testing of PTFE-Based Antifouling Coatings in Fresh Water
Microstructure and Phase Composition of the Cr-Mn-Fe-Co-Ni High-Entropy Alloy Obtained by Wire-Arc Additive Manufacturing
Influence of the Titanium Nitride Deposition Duration during Vacuum Ion-Plasma Treatment on the Resistance of Coatings in a Hydrogen Atmosphere
Effect of a Sintering Additive's Concentration Forming a Solid Solution with Aluminum Spinel, on Phase Formation
Effect of Pb Small Additives on the Phase Composition and Microstructure Pd-Based Membrane Alloys
Stages of Cavitation Erosion Development on Steel Surfaces
Computational and Experimental Methods of Strength Analysis of Polyurethane Diaphragms Operating under Cyclic Loadings
Influence of Surface Tension of the Intrapore Liquid on Structural-Surface Properties of Hydrated Aluminum Oxide Obtained by Interaction of Aluminum Salts with Ammonia Gas
Effect of Atmospheric Pressure Plasma in Inert Gases on Orthopedic Ultra-High Molecular Weight Polyethylene
Influence of Severe Plastic Deformations on Martensitic Transformation in Alloys of Fe-Cr-Ni System
Isothermal Transformation Diagrams of Austenite in Maraging Steel 08H15N5D2T at Overcooling
Influence of Curved Fibers on the Mechanical Behavior of Variable Stiffness Composites
Deformation Cycle Resistance of Titanium Nickelide - Polymer Composite Material
Determination of Rational Structural Parameters for Sandwich Panels with a Cone-Shaped Filler's Cells
Carbon Nanomaterials in Electrochemical Coatings of Machinery Products
The Structure and Magnetic Properties of (Sm,Er)-Fe-N Powders Prepared by Ball Milling
Plastic Strain Localization in Steel Composites Produced via Additive Manufacturing
Study of Ageing Processes of a Nickel Superalloy under Conditions of High-Temperature Loadings
The Structure and Properties of Hardening Coatings of Low-Chromium Hard Alloys for Agricultural Machine Parts
Superminiature Eddy Current Probe for Measuring the Electrical Conductivity of Copper Thin Films
Gypsum Composite Reinforced with Polymer Fibers
Experimental Study of Material Structure in the Processing of Ball Pins
Thin Ni/Al Metal Films Characterization Using a High-Frequency Electromagnetic Field
Nonlocality of Dynamic Characteristics for Edge Dislocation Segment, Elastic Interaction of Dislocation with Pinning Points, and their Effect on Dislocation AIIF
Dispersion of the Steel Structure and its Effect on Magnetic and Mechanical Properties of Steel
Increasing the Fire Resistance of Reinforced Concrete Structures
Justification of the Titanium-Based Alloy Chemical Composition to Provide High Hardness
Numerical Simulation of the Stress-Strain State of a Hybrid Titanium-Polymer Composite Material for Optimizing the Design of Aircraft Structures
Research of Wear Resistance of Medical Materials during Friction with High-Molecular Polyethylene
In Situ Phase Transformations in CrN/Cr-?oated E110 Alloy under High Temperature
Influence of Various Production and Processing Methods on the Structure and Properties of Porous Titanium Coatings
Investigation of Factors Affecting Adhesion Strength of Adhesive Layer to Substrate Surface
Amorphous-Crystalline Composite Microstructure Formation in Zr46Cu46Al8 Alloy at the Conditions of Selective Laser Melting
Reference Data and Multi-Factorial Methods for Development of Modern Materials
Non-Sinusoidal Waves in a Metamaterial, Specified as a Nonlinear Elastic Lattice with a Center of Symmetry
Wood-Cement Composite and its Reinforcement with Wooden Bars
Evaluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations
Features of the Microstructural Composition of Low-Alloyed Aluminum Alloys of the 6XXX Series with Small Additions of Zr and Sc
Prospects for the Synthesis of Silicate Geopolymer Materials Based on Ash and Slag Waste from Thermal Power Plants in the Russian Arctic Zone
Prospects for Improving Physical and Mechanical Properties of Corundum Ceramics
Physical Modification of Products Made of Soft Magnetic Materials under Texturing Effects
Investigation of the Parameters of the Surface Layer of Steel 12X18H10T after Plastic Deformation
Large-Scale Synthesis of Molybdenum Carbide Based Catalyst by Vacuum-Free D? Arc Plasma Method
Application of the Method for Optical Measuring the Neck Profile to Determine the Hardening Curve of Aluminum from the Results of the Tensile Test
Relation of the Mayer Index to the Characteristics of the Power Law of Metal Hardening
Determination of the Tensile Strain by Indenting the Sphere
Structural Transformations at the Interface of Explosively Welded Al and Ti: Experimental Research and Numerical Simulation
Influence of Composition and Structure on Wear Resistance of Deposited Metal
Influence of Titanium and Nitrogen on Phase Composition and Properties of Coatings Obtained by Surfacing with Cast Rods of PNL-04Kh27N7M3D2T Type
Production of Nanostructured Boron Carbide Ceramics for Industrial Applications
Application of Nano-Chromium Oxide for Production of Boron Carbide Ceramics
The Structure and Characteristics of Wear-Resistant Coatings, Obtained by Supersonic Plasma Spraying
Identification of Elastic Characteristics of Unidirectional CFRP under Off-Axis Tension Taking into Account the Rates of Loading
Stability of a Rectangular Shape Memory Alloy Plate during the Forward Phase Transition for Thermomechanically Coupled Statement
Testing of Magnetoactive Elastomeric Composite Materials
Mechanical Properties of Co-Al-Mo-Nb Intermetallic Alloys
Effect of Heat Treatment on Structure of Austenitic Steels Fabricated by Laser Synthesis
Development and Research of Composite Coatings of Ti-B System, Sprayed by Microplasma Method
Change in the Fine Structure of the Additive Al-Mg Alloy after Electron-Beam Processing
Chapter 1: Materials Processing Technologies
Maximum Operability of Replaceable Hard Alloy Plates during Steel Turning EI867-VD
A Note on the Change in the Surface Quality Characteristics during Flat Grinding of Titanium Intermetallic with Shape Memory Effect
Dispersion of Flatness of the Machined Surface and Optimization of Cutting Conditions when Performing a Real Experiment of Face Milling of High-Hardness Steel
Modeling of Molten Metal Flows in a Continuous-Casting Machine Mold at Free Rotation of the Floating Closed-Bottom Nozzle
Modeling of Gear-Hone Teeth with Consideration of Elasticity, Correction, and Operational Wear
Engineering Quality Support of the Surface Layer and Operational Properties of Machine Parts during the Process of Electroerosion
The Model of Local Fracture on Brittle Material Surface during Machining
Investigation of the Effect of Pretreatment of the Carbon Fiber Surface on the Continuity of the Sol-Gel Coating
Contact Stresses during Roller Rolling of Heat-Exchange Tubes
Application of Combined Processing Methods for High-Tech Products Manufacturing
Development of Technology for Producing Holes in Parts with Unpredictable Surface Fluctuations
Welding Mode Justification for a T-Joint
Use of Hidden Phase Transfer Heat for Temperature Stabilization in Technological Cutting Systems
Influence of Processing Modes on the Distribution of Wall Thickness during Cell Formation
Researching of the Influence of the Cutting Parameters of Expanded Polystyrene with a Thermal Tool on the Form Errors of the Product
Determination of the Optimal Temperature for Processing Styrofoam with a Thermo-Tool
Study on the Ultrasonic Vibration Impact on the Performance of Taps when Thread Cutting in Workpieces Made of Difficult-to-Machine Materials
Tilt Angle Effect on Friction Stir Welding Conditions
Investigation of Hadfield Steel Machinability in Milling Operations
The Impact of Cutting Modes on the Output Turn-Milling Parameters for High-Speed Steel
Algorithm of Determination of Optimal Conditions for Low-Rigidity Prismatic Workpieces Flat Grinding
Analysis of the Properties of the Fluidized Bed during the Formation of the Abrasive-Polymer Compound for Waterjet Cutting
Improving Productivity of Misaligned Boring of Hydraulic Cylinder Holes with a Rotating Cutter Block Based on Computer Simulation Results
Combined Processing of Flat End Surfaces of Electrical Parts
Efficiency of Application of Epilams when Protecting the Surface of Fast Cutting Tools
Modeling of Technological Processes for the Deposition of Composite Plasma Coatings
Influence of Forging Force on Tensile Strength of the 30KhGSA/40KhMFA Steels Welded Joints Made by Rotary Friction Welding
Effect of Elements of the Cutting Conditions on the Amplitude of Vibration during End Milling
Titanium Drawing
Effect of Hot Machining on the Surface Quality of Cylindrical Parts
Application of Additive Technologies in the Development of Aerodynamic Models for Rocket and Space Technology Products
Additive Technologies in Manufacturing and IT Industry
Analysis of Factors Affecting Operability to Assess Risks and Opportunities in the Operation of Built-Up Cutting Tools
High-Performance Processing of Complex-Shaped Parts Using Combined Methods
Improving the Efficiency of Machine Grinding of Double Curvature Surfaces with a Profiled Flap Wheel
Calculation of the Grinding Performance of Diamond-Bearing Ceramic Tools
The Use of Laser Surface Modification Technologies for Obtaining Parts of Roller-Screw Mechanism
Development and Implementation of the Technology for Obtaining Channels in the Turbopump Units Bodies
The Use of Additive Technologies in the Study of the Process of Cross Wedge Rolling Workpiece for the Stamping of the Crankshaft
Model Selection and Dragging Parameters in Cross-Wedge Rolling
Research of the Influence of Cutting Conditions on the Temperature Field during Turning
Improving the Corrosion Resistance of Polished Stainless Steel Parts by Introducing the Energy of the Ultrasonic Field into the Forming Zone
Application of Software Tools for Simulation of Hot Isostatic Pressing
The Method of Calculating the Optimal Shape of the Electrode-Tool for Electrochemical Treatment of Gas Turbine Engine Blades
Quantitative Evaluation of the Effectiveness of Laser Surface Modification Technologies
Research the Impulse Stamping Technology of High-Strength Hard-to-Form Alloys
Cold Rolling Electrostimulation of Hard-Deform Alloys
Technological Characteristics of Production of Implants from Titanium and Alloys Based on it
Ultrasonic Surface Machining of Aluminium Alloy Parts
Numerical Simulation of Shrinkage Porosity during Casting Process
Numerical Simulation of Welding Distortion in Laser Metal Deposition Additive Manufacturing Process
Influence of High-Speed ECAP on the Structure and Properties of Copper and Copper Alloy of Cu-Cr System
Manufacture of Molding Tooling Based on TEIS-53 Heat-Resistant Resin
Simulation of a Diamond Grain Interaction with Ceramics Using the Smoothed Particle Galerkin Method
Implementation of a Fatigue Fracture Approach to Grinding Wheel Wear Using Numerical Simulation
Creation of Grooving and Parting Tools with Cooling Channels Manufactured Using Additive Technologies
Additive Technology for Forming Channels with Galvanic-Mechanical Coatings
Research on the Mandrel Wear of a Screw Rolling Piercing Mill by the Finite Element Method
Influence of Friction Stir Welding Modes of Copper and Aluminum Alloys
Influence of the Duration of Current Pulses on the Roughness in the Combined Processing of Corrosion Steel 12H18N10T
Simulation of Rolling and Analysis of Structure and Properties of F420W Cold-Resistant Steel for Manufacture of Wind Turbine Towers
Hybrid Optimization for Machinability Enhancement during Green Machining of Stainless Steel
Developing Spiral-Conical Gears for Microsystems by Wire-Assisted Electrical Discharge Machining
Some Aspects of the Experimental Method for Determining Residual Stresses in the Circular Grooves of Body Parts
Influence of Preheating and Postweld Heat Treatment on the Structure and Strength of the Wire Frame Welded Joint Made of Spring Steel C62D
Simulation of Hydro-Mechanical Billet Pressing of Fibrous Bimetallic Composites
The Effect of Hydrogen on the Crack Resistance in the Laser Treatment Area of Structural Steels Used for the Manufacture of Sealed Capsules during Hot Isostatic Pressing
Technology of Obtaining and Mechanical Processing of Resistant Powder Coatings of Ni-Mo-Al System
Modernization of Electrode Composite Material Based on Copper Powder for Electrical Discharge Machining of High-Strength Alloys
Development of Thermoplastic Composite Tube from HDPE/Barley Straw Fibers Using Extrusion Method
Sequential Treatment of Steel Surfaces by Nitriding and Ultrasonic Hardening
Quality Control of Gas-Thermal Coatings of Variable Composition
Constructional Features and Energetic Parameters Influence on Structure Formation and Sealed Welded Joints Properties in the Production of Capsules for Hot Isostatic Pressing
Modification of the Surface of Structural Materials by Concentrated Energy Flows in Order to Improve their Performance Properties
The Peculiar Properties of Economically Effective Technology of Forming of the Ceramic Coating Based on Aluminum Oxide
Intensification of Restoration of Hydraulic Equipment Components by Iron Plating in the Flow of Electrolyte
Mathematical Modeling of Anodic Oxidation and Cathodic Reduction of Metals Prone to Passivation, Taking into Account the Peculiarities of Heat and Mass Transfer in the IEG under Pulsed Modes
Friction-Electric Modification of the Surfaces of Machine Parts with Tungsten Carbides
Weldability Window for High-Velocity Impact Welding of Al and Ti Plates Obtained by Numerical Simulation
Study of the Effect of Copper (II), Zinc and Iron (II) Sulphates on the Froth Flotation of Sphalerite by Sulfhydryl Collectors
Chapter 2: Materials Science
On the "Super" Storage of Hydrogen in Activated Graphite Nanofibers
Investigation of the Effect of Vibration on the Bearing Capacity of Composite Materials
Computational and Experimental Evaluation of the Tensile Strength of a Reinforced Polymer Coating with a Substrate
Microstructure and Properties of 20Cr23Ni18 (AISI 304L) Thin Steel Tapes Obtained by Melt Spinning
Tribological Behavior of Titanium Alloys during Friction against Ceramics
Regularities of Mass Transfer in the Finishing Layer on the Basis of a Heat-Insulating Dry Construction Mixture in the Process of Moistening
Quality Assurance for the Appearance of Paint Coatings
Increased Material Durability with a Discrete Oxide Layer
Mathematical Modeling of Optimization Process for Shell Mold Material Physical Properties and Structure
Polylactide Fiber Materials and their Application in Agriculture
Influence of Biodegradable Component Nature on Biodegradation of Composites Based on Polyethylene
Methods of Titanium Carbide-Based Coatings Laser Synthesis
Method of Diamond-Like Coatings Obtaining
Formation of High-Entropy Multilayer Compositions with a Hierarchical Structure
Corrosion Processes of Steel Reinforcement in Concrete Structures Based on Secondary Resources of Metallurgical Production
Stages and Irregularities of Plastic Strain in Austenitic Stainless Steel within a Temperature Range of 143 < t < 420 k
A Study of the Effect of Impact Speed on the Dynamics of Mechanical Interactions of Bodies
Changes in Mechanical Characteristics of HPC Samples Modified with WC and WO3 Nanopowder Agglomerates
Research of the Possibility of Using Glass and Sodium Hydroxide for Synthesis of Aluminum Silicate Propants Based on Drill Sludges
Changes in Wettability and Corrosion Properties of Coatings Obtained on MA8 Magnesium Alloy after Accelerated Climatic Tests
Determination of Optimal Parameters for Silicon Dioxide Production
Influence of Tungsten Nanopowders on the Kinetics of Cement Stone Strength Gain
Composite Nanomaterials for Implementation of Promising Memristive Structures
Monitoring of Properties Subjected to Innovative Technological Treatments of Subsurface Layers of Materials by AMD-Methods
Preparation of Carbidostals
Thermodynamic Analysis of the Nickel-Chromium-Titanium-Nitrogen System
Optimization of Dispersion-Strengthened Material Based on Copper Powder for Valve Guides of Internal Combustion Engines
Modeling the Temperature Dependences of the Dielectric Constant of PCM under Conditions of Intense Heating
Testing of PTFE-Based Antifouling Coatings in Fresh Water
Microstructure and Phase Composition of the Cr-Mn-Fe-Co-Ni High-Entropy Alloy Obtained by Wire-Arc Additive Manufacturing
Influence of the Titanium Nitride Deposition Duration during Vacuum Ion-Plasma Treatment on the Resistance of Coatings in a Hydrogen Atmosphere
Effect of a Sintering Additive's Concentration Forming a Solid Solution with Aluminum Spinel, on Phase Formation
Effect of Pb Small Additives on the Phase Composition and Microstructure Pd-Based Membrane Alloys
Stages of Cavitation Erosion Development on Steel Surfaces
Computational and Experimental Methods of Strength Analysis of Polyurethane Diaphragms Operating under Cyclic Loadings
Influence of Surface Tension of the Intrapore Liquid on Structural-Surface Properties of Hydrated Aluminum Oxide Obtained by Interaction of Aluminum Salts with Ammonia Gas
Effect of Atmospheric Pressure Plasma in Inert Gases on Orthopedic Ultra-High Molecular Weight Polyethylene
Influence of Severe Plastic Deformations on Martensitic Transformation in Alloys of Fe-Cr-Ni System
Isothermal Transformation Diagrams of Austenite in Maraging Steel 08H15N5D2T at Overcooling
Influence of Curved Fibers on the Mechanical Behavior of Variable Stiffness Composites
Deformation Cycle Resistance of Titanium Nickelide - Polymer Composite Material
Determination of Rational Structural Parameters for Sandwich Panels with a Cone-Shaped Filler's Cells
Carbon Nanomaterials in Electrochemical Coatings of Machinery Products
The Structure and Magnetic Properties of (Sm,Er)-Fe-N Powders Prepared by Ball Milling
Plastic Strain Localization in Steel Composites Produced via Additive Manufacturing
Study of Ageing Processes of a Nickel Superalloy under Conditions of High-Temperature Loadings
The Structure and Properties of Hardening Coatings of Low-Chromium Hard Alloys for Agricultural Machine Parts
Superminiature Eddy Current Probe for Measuring the Electrical Conductivity of Copper Thin Films
Gypsum Composite Reinforced with Polymer Fibers
Experimental Study of Material Structure in the Processing of Ball Pins
Thin Ni/Al Metal Films Characterization Using a High-Frequency Electromagnetic Field
Nonlocality of Dynamic Characteristics for Edge Dislocation Segment, Elastic Interaction of Dislocation with Pinning Points, and their Effect on Dislocation AIIF
Dispersion of the Steel Structure and its Effect on Magnetic and Mechanical Properties of Steel
Increasing the Fire Resistance of Reinforced Concrete Structures
Justification of the Titanium-Based Alloy Chemical Composition to Provide High Hardness
Numerical Simulation of the Stress-Strain State of a Hybrid Titanium-Polymer Composite Material for Optimizing the Design of Aircraft Structures
Research of Wear Resistance of Medical Materials during Friction with High-Molecular Polyethylene
In Situ Phase Transformations in CrN/Cr-?oated E110 Alloy under High Temperature
Influence of Various Production and Processing Methods on the Structure and Properties of Porous Titanium Coatings
Investigation of Factors Affecting Adhesion Strength of Adhesive Layer to Substrate Surface
Amorphous-Crystalline Composite Microstructure Formation in Zr46Cu46Al8 Alloy at the Conditions of Selective Laser Melting
Reference Data and Multi-Factorial Methods for Development of Modern Materials
Non-Sinusoidal Waves in a Metamaterial, Specified as a Nonlinear Elastic Lattice with a Center of Symmetry
Wood-Cement Composite and its Reinforcement with Wooden Bars
Evaluation of Magnetostriction and Differential Magnetic Permeability of Low-Alloy Structural Steel Specimens under Cyclic and Static Deformations
Features of the Microstructural Composition of Low-Alloyed Aluminum Alloys of the 6XXX Series with Small Additions of Zr and Sc
Prospects for the Synthesis of Silicate Geopolymer Materials Based on Ash and Slag Waste from Thermal Power Plants in the Russian Arctic Zone
Prospects for Improving Physical and Mechanical Properties of Corundum Ceramics
Physical Modification of Products Made of Soft Magnetic Materials under Texturing Effects
Investigation of the Parameters of the Surface Layer of Steel 12X18H10T after Plastic Deformation
Large-Scale Synthesis of Molybdenum Carbide Based Catalyst by Vacuum-Free D? Arc Plasma Method
Application of the Method for Optical Measuring the Neck Profile to Determine the Hardening Curve of Aluminum from the Results of the Tensile Test
Relation of the Mayer Index to the Characteristics of the Power Law of Metal Hardening
Determination of the Tensile Strain by Indenting the Sphere
Structural Transformations at the Interface of Explosively Welded Al and Ti: Experimental Research and Numerical Simulation
Influence of Composition and Structure on Wear Resistance of Deposited Metal
Influence of Titanium and Nitrogen on Phase Composition and Properties of Coatings Obtained by Surfacing with Cast Rods of PNL-04Kh27N7M3D2T Type
Production of Nanostructured Boron Carbide Ceramics for Industrial Applications
Application of Nano-Chromium Oxide for Production of Boron Carbide Ceramics
The Structure and Characteristics of Wear-Resistant Coatings, Obtained by Supersonic Plasma Spraying
Identification of Elastic Characteristics of Unidirectional CFRP under Off-Axis Tension Taking into Account the Rates of Loading
Stability of a Rectangular Shape Memory Alloy Plate during the Forward Phase Transition for Thermomechanically Coupled Statement
Testing of Magnetoactive Elastomeric Composite Materials
Mechanical Properties of Co-Al-Mo-Nb Intermetallic Alloys
Effect of Heat Treatment on Structure of Austenitic Steels Fabricated by Laser Synthesis
Development and Research of Composite Coatings of Ti-B System, Sprayed by Microplasma Method
Change in the Fine Structure of the Additive Al-Mg Alloy after Electron-Beam Processing
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
