Energy Storage Technology and Applications
portes grátis
Energy Storage Technology and Applications
Widiyandari, Hendri; Jamaluddin, Anif; Purwanto, Agus
Trans Tech Publications Ltd
10/2022
188
Mole
Inglês
9783035717068
15 a 20 dias
460
Descrição não disponível.
Preface
Chapter 1: Materials for Li-ion Batteries Cathodes
Synthesis of Nickel Cobalt Manganese Ternary Transition Metal Oxide from Mixed Hydroxide Precipitate as a Precursor to NCM811
LiNi0.7Mn0.3O2 as a Cheap Cobalt Free Nickel Rich Cathode Material for High-Performance Li-Ion Batteries
Synthesis and Characterization of Cobalt Free LiNiO2 Substituted by Al-Doping from Beverage Cans via Solid-State Method
Electrochemical Performance of a Water-Based LiFePO4 Cathode for Li-Ion Batteries
Effects of Conductive Agents on Electrochemical Performance of Water-Based LiNi0.6Mn0.2Co0.2O2 Cathodes for Cylindrical Cell Production of Lithium-Ion Batteries
Economical Hydrometallurgical Routes for LiFePO4/C Cathode Materials Fabrication
Chapter 2: Materials for Li-ion Batteries Anodes
Silicone for Lithium-Ion Battery Anode Derived from Geothermal Waste Silica through Magnesiothermic Reduction and Double Stages in Acid Leaching
Utilization of Cu-Foil Waste as a High-Capacity Anode Material for High Performance LiNi0.8Co0.1Mn0.1O2/ CuO@Graphite Batteries
Synthesis of Lithium Titanium Oxide (Li4Ti5O12) through Sol-Gel Method and the Effect of Graphene Addition in Lithium-Ion Battery Anodes
Effect of Synthesis Temperature on Structural and Magnetic Properties in Hematite (?-Fe2O3) Nanoparticles Produced by Co-Precipitation Method
Chapter 3: Polymeric Separators for Li-ion Batteries
Electrospun SiO2- Containing Poly(Vinylidene Fluoride) Nanofiber Membranes as Lithium-Ion Battery Separators: Effect of SiO2 Content on Performance
Synthesis and Characterization of Cellulose Acetate Membrane from Cigarette Butts as Gel Polymer Electrolytes for Lithium-Ion Battery
Chapter 4: Materials and Technologies for Energy Storage and Conversion Devices
Experimental and Numerical Analysis of Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) with Different Fuel Flow Rate in Improving Fuel Cell Performance
A Novel Synthesis of Cathode Material NaNi0.5Ti0.5O2 for Sodium-Ion Batteries
Chapter 5: Ferroelectric Materials
Synthesis of BaTiO3 Ceramics Using Co-Precipitation and Solid-State Reaction Method with Sintering Temperature Variation
Sintering Temperature Effects on Photocatalytic Activity of SrTi0.80Mn0.20O3
Chapter 1: Materials for Li-ion Batteries Cathodes
Synthesis of Nickel Cobalt Manganese Ternary Transition Metal Oxide from Mixed Hydroxide Precipitate as a Precursor to NCM811
LiNi0.7Mn0.3O2 as a Cheap Cobalt Free Nickel Rich Cathode Material for High-Performance Li-Ion Batteries
Synthesis and Characterization of Cobalt Free LiNiO2 Substituted by Al-Doping from Beverage Cans via Solid-State Method
Electrochemical Performance of a Water-Based LiFePO4 Cathode for Li-Ion Batteries
Effects of Conductive Agents on Electrochemical Performance of Water-Based LiNi0.6Mn0.2Co0.2O2 Cathodes for Cylindrical Cell Production of Lithium-Ion Batteries
Economical Hydrometallurgical Routes for LiFePO4/C Cathode Materials Fabrication
Chapter 2: Materials for Li-ion Batteries Anodes
Silicone for Lithium-Ion Battery Anode Derived from Geothermal Waste Silica through Magnesiothermic Reduction and Double Stages in Acid Leaching
Utilization of Cu-Foil Waste as a High-Capacity Anode Material for High Performance LiNi0.8Co0.1Mn0.1O2/ CuO@Graphite Batteries
Synthesis of Lithium Titanium Oxide (Li4Ti5O12) through Sol-Gel Method and the Effect of Graphene Addition in Lithium-Ion Battery Anodes
Effect of Synthesis Temperature on Structural and Magnetic Properties in Hematite (?-Fe2O3) Nanoparticles Produced by Co-Precipitation Method
Chapter 3: Polymeric Separators for Li-ion Batteries
Electrospun SiO2- Containing Poly(Vinylidene Fluoride) Nanofiber Membranes as Lithium-Ion Battery Separators: Effect of SiO2 Content on Performance
Synthesis and Characterization of Cellulose Acetate Membrane from Cigarette Butts as Gel Polymer Electrolytes for Lithium-Ion Battery
Chapter 4: Materials and Technologies for Energy Storage and Conversion Devices
Experimental and Numerical Analysis of Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) with Different Fuel Flow Rate in Improving Fuel Cell Performance
A Novel Synthesis of Cathode Material NaNi0.5Ti0.5O2 for Sodium-Ion Batteries
Chapter 5: Ferroelectric Materials
Synthesis of BaTiO3 Ceramics Using Co-Precipitation and Solid-State Reaction Method with Sintering Temperature Variation
Sintering Temperature Effects on Photocatalytic Activity of SrTi0.80Mn0.20O3
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
Anode;Cathode;Electrochemical Properties;Ferroelectrics;Fuel Cell;Li-Ion Battery;Polymer;Polymer Electrolyte;Proton Exchange Membrane;Separator;Sodium-Ion Battery
Preface
Chapter 1: Materials for Li-ion Batteries Cathodes
Synthesis of Nickel Cobalt Manganese Ternary Transition Metal Oxide from Mixed Hydroxide Precipitate as a Precursor to NCM811
LiNi0.7Mn0.3O2 as a Cheap Cobalt Free Nickel Rich Cathode Material for High-Performance Li-Ion Batteries
Synthesis and Characterization of Cobalt Free LiNiO2 Substituted by Al-Doping from Beverage Cans via Solid-State Method
Electrochemical Performance of a Water-Based LiFePO4 Cathode for Li-Ion Batteries
Effects of Conductive Agents on Electrochemical Performance of Water-Based LiNi0.6Mn0.2Co0.2O2 Cathodes for Cylindrical Cell Production of Lithium-Ion Batteries
Economical Hydrometallurgical Routes for LiFePO4/C Cathode Materials Fabrication
Chapter 2: Materials for Li-ion Batteries Anodes
Silicone for Lithium-Ion Battery Anode Derived from Geothermal Waste Silica through Magnesiothermic Reduction and Double Stages in Acid Leaching
Utilization of Cu-Foil Waste as a High-Capacity Anode Material for High Performance LiNi0.8Co0.1Mn0.1O2/ CuO@Graphite Batteries
Synthesis of Lithium Titanium Oxide (Li4Ti5O12) through Sol-Gel Method and the Effect of Graphene Addition in Lithium-Ion Battery Anodes
Effect of Synthesis Temperature on Structural and Magnetic Properties in Hematite (?-Fe2O3) Nanoparticles Produced by Co-Precipitation Method
Chapter 3: Polymeric Separators for Li-ion Batteries
Electrospun SiO2- Containing Poly(Vinylidene Fluoride) Nanofiber Membranes as Lithium-Ion Battery Separators: Effect of SiO2 Content on Performance
Synthesis and Characterization of Cellulose Acetate Membrane from Cigarette Butts as Gel Polymer Electrolytes for Lithium-Ion Battery
Chapter 4: Materials and Technologies for Energy Storage and Conversion Devices
Experimental and Numerical Analysis of Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) with Different Fuel Flow Rate in Improving Fuel Cell Performance
A Novel Synthesis of Cathode Material NaNi0.5Ti0.5O2 for Sodium-Ion Batteries
Chapter 5: Ferroelectric Materials
Synthesis of BaTiO3 Ceramics Using Co-Precipitation and Solid-State Reaction Method with Sintering Temperature Variation
Sintering Temperature Effects on Photocatalytic Activity of SrTi0.80Mn0.20O3
Chapter 1: Materials for Li-ion Batteries Cathodes
Synthesis of Nickel Cobalt Manganese Ternary Transition Metal Oxide from Mixed Hydroxide Precipitate as a Precursor to NCM811
LiNi0.7Mn0.3O2 as a Cheap Cobalt Free Nickel Rich Cathode Material for High-Performance Li-Ion Batteries
Synthesis and Characterization of Cobalt Free LiNiO2 Substituted by Al-Doping from Beverage Cans via Solid-State Method
Electrochemical Performance of a Water-Based LiFePO4 Cathode for Li-Ion Batteries
Effects of Conductive Agents on Electrochemical Performance of Water-Based LiNi0.6Mn0.2Co0.2O2 Cathodes for Cylindrical Cell Production of Lithium-Ion Batteries
Economical Hydrometallurgical Routes for LiFePO4/C Cathode Materials Fabrication
Chapter 2: Materials for Li-ion Batteries Anodes
Silicone for Lithium-Ion Battery Anode Derived from Geothermal Waste Silica through Magnesiothermic Reduction and Double Stages in Acid Leaching
Utilization of Cu-Foil Waste as a High-Capacity Anode Material for High Performance LiNi0.8Co0.1Mn0.1O2/ CuO@Graphite Batteries
Synthesis of Lithium Titanium Oxide (Li4Ti5O12) through Sol-Gel Method and the Effect of Graphene Addition in Lithium-Ion Battery Anodes
Effect of Synthesis Temperature on Structural and Magnetic Properties in Hematite (?-Fe2O3) Nanoparticles Produced by Co-Precipitation Method
Chapter 3: Polymeric Separators for Li-ion Batteries
Electrospun SiO2- Containing Poly(Vinylidene Fluoride) Nanofiber Membranes as Lithium-Ion Battery Separators: Effect of SiO2 Content on Performance
Synthesis and Characterization of Cellulose Acetate Membrane from Cigarette Butts as Gel Polymer Electrolytes for Lithium-Ion Battery
Chapter 4: Materials and Technologies for Energy Storage and Conversion Devices
Experimental and Numerical Analysis of Low Temperature Proton Exchange Membrane Fuel Cell (PEMFC) with Different Fuel Flow Rate in Improving Fuel Cell Performance
A Novel Synthesis of Cathode Material NaNi0.5Ti0.5O2 for Sodium-Ion Batteries
Chapter 5: Ferroelectric Materials
Synthesis of BaTiO3 Ceramics Using Co-Precipitation and Solid-State Reaction Method with Sintering Temperature Variation
Sintering Temperature Effects on Photocatalytic Activity of SrTi0.80Mn0.20O3
Este título pertence ao(s) assunto(s) indicados(s). Para ver outros títulos clique no assunto desejado.
